B208B Packard Super OBD Code

OBD/2 B208B error code description and symptoms.

Output Shaft Speed sensor circuit intermittent failure The output shaft speed sensor signal to the PCM is irregular or interrupted.
Harness connector not properly seated Harness intermittently shorted, or open Harness connector damaged OSS sensor damaged, or not installed properly Verify harness and connector integrity Verify OSS sensor proper installation.

As long as the throttle plate remains closed, the idling speed and quality is controlled by the PCM via the idle control valve, and as can be seen from the above it should be clear that idle control on a gasoline engine is a complex affair. For instance, if the engine is started in sub-zero temperatures, the PCM will command the idling control valve to allow less air to enter the engine to enrich the air/fuel mixture to create a condition which is roughly analogous to how chokes worked on carburetted engines to control idling in cold weather.

B208B Packard Super Error Code Repair Process :

The rule of B208B code when it comes to emissions-related vehicle repair is that any modification that changes the vehicle from a certified configuration to a non-certified configuration is considered tampering: this applies to both vehicle owners and repair facilities and is, therefore, a Federal offense. Replacing a catalyst with a straight pipe is one traditional example of heater blower relay circuit failure. Likewise, overriding the OBD B208B error in system through the use of high-tech defeat devices or non-certified computer chips, for example, would also be considered tampering. The OBD system may, however, be repaired back to its original certified configuration with certified performance chips or appropriate aftermarket parts.

Difficulty Level (Easy)

Repair Time (20 Min.)

Cost Prediction : $ 60-110

Common Causes of Packard Super B208B OBD2 Code

A common cause of code B208B is the failure of Heater Blower Relay Circuit Failure, but there are several other possible causes as well, such as ;

• Camshaft Position Sensor harness is open or shorted
• Faulty Air Flow Meter
• Air fuel ratio (A/F) Sensor 1 Bank 1 circuit poor electrical connection
• Faulty TCM or TCM programming

B208B is a kind of Body Trouble Code Auto body problems aren't always easy to spot. Diagnosing auto body problems sometimes requires a little know-how. In this section you'll find articles dedicated to teaching you how to diagnose auto body problems.

B208B code for other Packard cars

You can view according B208B DTC for your car model. We selected several models to see obd2 solutions click and view it.

• B208B Packard 12
• B208B Packard 120
• B208B Packard 200
• B208B Packard 300
• B208B Packard 400
• B208B Packard 7
• B208B Packard A
• B208B Packard Carribean
• B208B Packard Cavalier
• B208B Packard Clipper
• B208B Packard Custom
• B208B Packard De
• B208B Packard Eight
• B208B Packard Executive
• B208B Packard Mayfair
• B208B Packard Patrician
• B208B Packard Twelve
• B208B Packard Twin

Engine OBD 2 Codes website is a freeware resource center for engine trouble codes.

About Us | Contact | Privacy

Copyright 2017 © All rights reserved