C0697 Ssangyong Rexton OBD Code

OBD/2 C0697 error code description and symptoms.

The Transmission Range Sensor (also referred to as the PRNDL input an/or neutral safety switch) tells the transmission control module (TCM) an the engine control module (PCM) that the transmission is in park, reverse, neutral, drive, low, 2nd, 3rd etc. It is attached directly to the manual valve of transmission, so when the shift lever is moved from park to drive, the Transmission Range Sensor communicates this critical information to the above mentioned vehicle control module systems.

At this point we are assuming that the fuses and relays are good. You will need to locate the PCM/TCM and the power input signal circuit using your vehicle information source. Unplug the connector from the PCM/TCM, place the ignition switch in the ON position, and probe the appropriate circuit with the positive test lead of the DVOM.

C0697 Ssangyong Rexton Error Code Repair Process :

The rule of C0697 code when it comes to emissions-related vehicle repair is that any modification that changes the vehicle from a certified configuration to a non-certified configuration is considered tampering: this applies to both vehicle owners and repair facilities and is, therefore, a Federal offense. Replacing a catalyst with a straight pipe is one traditional example of audio single-disc cd player internal fault. Likewise, overriding the OBD C0697 error in system through the use of high-tech defeat devices or non-certified computer chips, for example, would also be considered tampering. The OBD system may, however, be repaired back to its original certified configuration with certified performance chips or appropriate aftermarket parts.

Difficulty Level (Easy)

Repair Time (20 Min.)

Cost Prediction : $ 60-110

Common Causes of Ssangyong Rexton C0697 OBD2 Code

A common cause of code C0697 is the failure of Audio Single-Disc CD Player Internal Fault, but there are several other possible causes as well, such as ;

• Air fuel ratio (A/F) Sensor 1 Bank 1 harness is open or shorted
• Air fuel ratio (A/F) Sensor 1 Bank 1 circuit poor electrical connection
• Damaged ECM
• Incorrect Positive Crankcase Ventilation (PCV) hose connection

C0697 is a kind of Chassis Trouble Code Diagnosing chassis noises can be one of the most frustrating problems technicians face. Fortunately, manufacturers have engineered noise, vibration and harshness (NVH) diagnostic techniques and equipment to find the source of the noise.

C0697 code for other Ssangyong cars

You can view according C0697 DTC for your car model. We selected several models to see obd2 solutions click and view it.

• C0697 Ssangyong Actyon
• C0697 Ssangyong Chairman
• C0697 Ssangyong Korando
• C0697 Ssangyong Kyron
• C0697 Ssangyong Musso
• C0697 Ssangyong Rodius
• C0697 Ssangyong Stavic
• C0697 Ssangyong Tivoli
• C0697 Ssangyong W

Engine OBD 2 Codes website is a freeware resource center for engine trouble codes.

About Us | Contact | Privacy

Copyright 2017 © All rights reserved