C1672 Saab Mc OBD Code

OBD/2 C1672 error code description and symptoms.

The Transmission Fluid Pressure Switch allows the engine's control module (PCM) or Transmission Control Module (TCM) to use hydraulic fluid to engage the clutches in the transmission to allow for smoother shifting while driving. If the PCM or TCM detects an issue with the hydraulic clutch or the pressure switch, the PCM or TCM will set code C1672

On some transmissions, such as automated manual transmissions or automatic transmissions with manual mode, the GSP switch lets the TCM know whether or not the driver has selected automatic or manual function. On manual transmissions, the GSP switch informs the TCM which gear the driver is selecting, and may function as a neutral safety switch, depending on system design. The TCM also uses the gate select position switch to monitor transmission operation. For example, if the driver selects manual mode and selects 3rd gear on an automatic transmission, the TCM may monitor speed sensors to detect clutch and brake slippage.

C1672 Saab Mc Error Code Repair Process :

When you turn on the ignition, the Service Engine Soon or Check Engine C1672 light should flash briefly, indicating that the OBD system is ready to scan your vehicle for any malfunctions. After this brief flash, the light should stay off while you drive as long as no problems are detected. If o2 sensor circuit malfunction (bank 1 sensor 1) so, you'll be glad to know that your vehicle is equipped with an early warning system that could save you time, money, and fuel in addition to helping protect the o2 sensor circuit malfunction (bank 1 sensor 1).

Difficulty Level (Expert)

Repair Time (60 Min.)

Cost Prediction : $ 75-90

Common Causes of Saab Mc C1672 OBD2 Code

A common cause of code C1672 is the failure of O2 Sensor Circuit Malfunction (Bank 1 Sensor 1), but there are several other possible causes as well, such as ;

• Continuous oil flow to the VCT piston chamber
• Faulty spark plug (s)
• Faulty Variable Camshaft Timing (VCT) position solenoid
• Clogged or faulty fuel injector (s)

C1672 is a kind of Chassis Trouble Code Diagnosing chassis noises can be one of the most frustrating problems technicians face. Fortunately, manufacturers have engineered noise, vibration and harshness (NVH) diagnostic techniques and equipment to find the source of the noise.

C1672 code for other Saab cars

You can view according C1672 DTC for your car model. We selected several models to see obd2 solutions click and view it.

• C1672 Saab 750
• C1672 Saab 9.3
• C1672 Saab 9.3 Ii
• C1672 Saab 9.5
• C1672 Saab 9.5 Ii
• C1672 Saab 90
• C1672 Saab 900
• C1672 Saab 9000
• C1672 Saab 9000i
• C1672 Saab 900i
• C1672 Saab 92
• C1672 Saab 9-2
• C1672 Saab 9-2x
• C1672 Saab 93
• C1672 Saab 9-3
• C1672 Saab 95
• C1672 Saab 9-5
• C1672 Saab 96
• C1672 Saab 9-7
• C1672 Saab 9-7x
• C1672 Saab 99
• C1672 Saab 9-x
• C1672 Saab Aero-x
• C1672 Saab Gt
• C1672 Saab Sonett

Engine OBD 2 Codes website is a freeware resource center for engine trouble codes.

About Us | Contact | Privacy

Copyright 2017 © All rights reserved