C1872 Lagonda Lg OBD Code

OBD/2 C1872 error code description and symptoms.

The Transmission Fluid Pressure Switch allows the engine's control module (PCM) or Transmission Control Module (TCM) to use hydraulic fluid to engage the clutches in the transmission to allow for smoother shifting while driving. If the PCM or TCM detects an issue with the hydraulic clutch or the pressure switch, the PCM or TCM will set code C1872

On some transmissions, such as automated manual transmissions or automatic transmissions with manual mode, the GSP switch lets the TCM know whether or not the driver has selected automatic or manual function. On manual transmissions, the GSP switch informs the TCM which gear the driver is selecting, and may function as a neutral safety switch, depending on system design. The TCM also uses the gate select position switch to monitor transmission operation. For example, if the driver selects manual mode and selects 3rd gear on an automatic transmission, the TCM may monitor speed sensors to detect clutch and brake slippage.

C1872 Lagonda Lg Error Code Repair Process :

When you turn on the ignition, the Service Engine Soon or Check Engine C1872 light should flash briefly, indicating that the OBD system is ready to scan your vehicle for any malfunctions. After this brief flash, the light should stay off while you drive as long as no problems are detected. If c1872 air suspension gate solenoid output circuit short to ground so, you'll be glad to know that your vehicle is equipped with an early warning system that could save you time, money, and fuel in addition to helping protect the c1872 air suspension gate solenoid output circuit short to ground.

Difficulty Level (Expert)

Repair Time (60 Min.)

Cost Prediction : $ 75-90

Common Causes of Lagonda Lg C1872 OBD2 Code

A common cause of code C1872 is the failure of C1872 Air Suspension Gate Solenoid Output Circuit Short To Ground, but there are several other possible causes as well, such as ;

• Continuous oil flow to the VCT piston chamber
• Damaged ECM
• Damaged camshaft position (CMP) sensor
• Erratic camshaft position due to low oil pressure

C1872 is a kind of Chassis Trouble Code Diagnosing chassis noises can be one of the most frustrating problems technicians face. Fortunately, manufacturers have engineered noise, vibration and harshness (NVH) diagnostic techniques and equipment to find the source of the noise.

C1872 code for other Lagonda cars

You can view according C1872 DTC for your car model. We selected several models to see obd2 solutions click and view it.

• C1872 Lagonda 11.1
• C1872 Lagonda 11.9
• C1872 Lagonda 12
• C1872 Lagonda 16
• C1872 Lagonda 2.5-litre
• C1872 Lagonda 2-litre
• C1872 Lagonda 3.5-litre
• C1872 Lagonda 3-litre
• C1872 Lagonda 42 Hp
• C1872 Lagonda M
• C1872 Lagonda Rapide
• C1872 Lagonda Rapier
• C1872 Lagonda Special Six
• C1872 Lagonda V
• C1872 Lagonda Vignale

Engine OBD 2 Codes website is a freeware resource center for engine trouble codes.

About Us | Contact | Privacy

Copyright 2017 © All rights reserved