C2464 Daimler Conquest OBD Code

OBD/2 C2464 error code description and symptoms.

Vehicle Speed Sensor (VSS) Intermittent Indicates the powertrain control module (PCM) detected an error in the vehicle speed information. Vehicle speed data is received from either the vehicle speed sensor (VSS), transfer case speed sensor (TCSS), anti-lock brake system (ABS) control module, generic electronic module (GEM), or central timer module (CTM). This DTC is set the same way as C2464. However, it is intended to flash the transmission control indicator lamp (TCIL) for first time VSS circuit error/malfunctions. Refer to possible causes for C2464

In most cases, the TCM is integrated into a single housing with the PCM. Nevertheless, the section of the module which controls (automatic) transmission function may be powered up separately. In any case, the TCM is typically powered using switched (only present with the ignition switch in the ON, start, or run position) voltage. This circuit is normally equipped with a fuse, fusible link, and/or a relay. Frequently, the PCM and TCM are powered using the same relay albeit by separate circuits. Access to a reliable vehicle information source will yield necessary details of the TCM power circuit for the specific vehicle in question.

C2464 Daimler Conquest Error Code Repair Process :

The rule of C2464 code when it comes to emissions-related vehicle repair is that any modification that changes the vehicle from a certified configuration to a non-certified configuration is considered tampering: this applies to both vehicle owners and repair facilities and is, therefore, a Federal offense. Replacing a catalyst with a straight pipe is one traditional example of 3-4 shift malfunction. Likewise, overriding the OBD C2464 error in system through the use of high-tech defeat devices or non-certified computer chips, for example, would also be considered tampering. The OBD system may, however, be repaired back to its original certified configuration with certified performance chips or appropriate aftermarket parts.

Difficulty Level (Soso)

Repair Time (30 Min.)

Cost Prediction : $ 80-170

Common Causes of Daimler Conquest C2464 OBD2 Code

A common cause of code C2464 is the failure of 3-4 Shift Malfunction, but there are several other possible causes as well, such as ;

• EVAP system hose leaking
• Faulty front heated oxygen sensor
• Fuel filler cap remains open or fails to close
• Incorrect fuel pressure

C2464 is a kind of Chassis Trouble Code Diagnosing chassis noises can be one of the most frustrating problems technicians face. Fortunately, manufacturers have engineered noise, vibration and harshness (NVH) diagnostic techniques and equipment to find the source of the noise.

C2464 code for other Daimler cars

You can view according C2464 DTC for your car model. We selected several models to see obd2 solutions click and view it.

• C2464 Daimler 2.5-litre
• C2464 Daimler 24
• C2464 Daimler 3-litre
• C2464 Daimler 4.2
• C2464 Daimler 4.5-litre
• C2464 Daimler 4-litre
• C2464 Daimler Daimler
• C2464 Daimler Db
• C2464 Daimler De
• C2464 Daimler Dk
• C2464 Daimler Double Six
• C2464 Daimler Light
• C2464 Daimler Limousine
• C2464 Daimler Majestic
• C2464 Daimler One-o-four
• C2464 Daimler Sp
• C2464 Daimler Super

Engine OBD 2 Codes website is a freeware resource center for engine trouble codes.

About Us | Contact | Privacy

Copyright 2017 © All rights reserved