C2951 Kia Joice OBD Code

OBD/2 C2951 error code description and symptoms.

Variable Cam Timing Over-advanced (Bank 1) The comprehensive component monitor (CCM) monitors the VCT position for an over-advanced camshaft timing.
The test fails when the camshaft timing exceeds a maximum calibrated value or remains in an advanced position. Cam timing improperly set No oil flow to the VCT piston chamber Low oil pressure VCT solenoid valve stuck closed Camshaft advance mechanism binding (VCT unit) C2951 DTC is a check of the VCT unit.

As the engine heats up and combustion becomes easier and more complete, the PCM will command the idling control valve to increase the amount of air entering the engine to suit the changing conditions. However, when the load on the engine changes, say, when some electrical consumers or other systems are either turned on or off, the PCM adapts the signal voltage to the idle control valve to ensure that the idling speed remains stable, and at the RPM specified by the manufacturer.

C2951 Kia Joice Error Code Repair Process :

The rule of C2951 code when it comes to emissions-related vehicle repair is that any modification that changes the vehicle from a certified configuration to a non-certified configuration is considered tampering: this applies to both vehicle owners and repair facilities and is, therefore, a Federal offense. Replacing a catalyst with a straight pipe is one traditional example of pats transceiver module signal is not received. Likewise, overriding the OBD C2951 error in system through the use of high-tech defeat devices or non-certified computer chips, for example, would also be considered tampering. The OBD system may, however, be repaired back to its original certified configuration with certified performance chips or appropriate aftermarket parts.

Common Causes of Kia Joice C2951 OBD2 Code

A common cause of code C2951 is the failure of PATS Transceiver Module Signal Is Not Received, but there are several other possible causes as well, such as ;

Camshaft advance mechanism binding (VCT unit)
Faulty TCM or TCM programming
Faulty Crankshaft Position Sensor (POS)
Intake air leaks

C2951 is a kind of Chassis Trouble Code

Diagnosing chassis noises can be one of the most frustrating problems technicians face. Fortunately, manufacturers have engineered noise, vibration and harshness (NVH) diagnostic techniques and equipment to find the source of the noise.

Engine OBD 2 Codes website is a freeware resource center for engine trouble codes.

About Us | Contact | Privacy

C2951 Kia Joice OBD Code

C2951 Kia Joice Error Code Repair Process :

Common Causes of Kia Joice C2951 OBD2 Code

C2951 code for other Kia cars