C3412 Chevrolet Cheyenne OBD Code

OBD/2 C3412 error code description and symptoms.

Low Speed Fuel Pump Primary Circuit Malfunction The PCM monitors the low speed fuel pump (LFP) primary circuit output from the PCM.
The test fails if: When the LFP circuit is commanded on (grounded), excessive current draw is detected on the LFP circuit; or when the LFP circuit is commanded off, voltage is not detected on the LFP circuit (the PCM expects to detect VPWR voltage coming through the low speed fuel pump relay coil to the LFP circuit). Open or shorted low fuel pump (LFP) circuit Open VPWR to low speed fuel pump relay Damaged low speed fuel pump relay Damaged PCM An open circuit or short to ground can only be detected with the low speed fuel pump.

Circuit High Input codes like C3412 are mostly caused by defective alternators that develop excessive voltages, although there may be other causes as well, such as short circuits that 'leak' current into a particular system from other, unrelated systems that work on higher voltages. Note that in the case of short circuits that leak power into a control circuit, there is likely to be other, seemingly unrelated trouble codes present along with the code(s) being investigated. Diagnosing a 'high input' code will always involve a thorough testing of the charging system as a first step, followed by measures to isolate the system from all other possible sources of power during resistance, continuity, and reference voltage tests.

C3412 Chevrolet Cheyenne Error Code Repair Process :

If your seat switch reference voltage positive common supply voltage fault check engine light is illuminated, it's best to take it in for diagnostic testing, which can feel like a hassle. Because while the lights vary in appearance from vehicle to vehicle, all have the same basic meaning: There's a problem with the car's emissions system. The on-board diagnostics system C3412 and engine control unit are in charge of monitoring a bunch of different seat switch reference voltage positive common supply voltage fault, and if they get a reading that's a little out of whack, up pops the check engine light.

Common Causes of Chevrolet Cheyenne C3412 OBD2 Code

A common cause of code C3412 is the failure of Seat Switch Reference Voltage Positive Common Supply Voltage Fault, but there are several other possible causes as well, such as ;

EVAP canister or fuel tank leaks
Faulty starter motor
Insufficient cylinders compression
Faulty TCM or TCM programming

C3412 is a kind of Chassis Trouble Code

Diagnosing chassis noises can be one of the most frustrating problems technicians face. Fortunately, manufacturers have engineered noise, vibration and harshness (NVH) diagnostic techniques and equipment to find the source of the noise.

C3412 Chevrolet Cheyenne OBD Code

C3412 Chevrolet Cheyenne Error Code Repair Process :

Common Causes of Chevrolet Cheyenne C3412 OBD2 Code

C3412 code for other Chevrolet cars