P000E Mercedes-benz Vision OBD Code

OBD/2 P000E error code description and symptoms.

Fuel Rail Pressure Sensor in Range But Low The comprehensive component monitor (CCM) monitors the FRP pressure for acceptable fuel pressure. The test fails when the fuel pressure falls below a calibrated value. Low fuel pressure Damaged FRP sensor Excessive resistance in circuit Low or no fuel A FRP PID value below 551 kpa (80 psi) indicates a failure Low or no fuel A FRP PID value greater than 896 kpa (130 psi) indicates a failure.

One example of this would be when an automatic vehicle in placed in gear. To prevent the added drag from the torque converter and transmission from reducing the idling speed, the PCM will command the idle control valve to allow more air to enter the engine, while at the same time, adjusting the injector pulse width to inject more fuel to suit the increased amount of air. Note that the idle air control valve is closed by the PCM when the throttle plate is opened to prevent excess air from entering the engine.

P000E Mercedes-benz Vision Error Code Repair Process :

If your scp (j1850) invalid or missing data for primary id check engine light is illuminated, it's best to take it in for diagnostic testing, which can feel like a hassle. Because while the lights vary in appearance from vehicle to vehicle, all have the same basic meaning: There's a problem with the car's emissions system. The on-board diagnostics system P000E and engine control unit are in charge of monitoring a bunch of different scp (j1850) invalid or missing data for primary id, and if they get a reading that's a little out of whack, up pops the check engine light.

Common Causes of Mercedes-benz Vision P000E OBD2 Code

A common cause of code P000E is the failure of SCP (J1850) Invalid or Missing Data for Primary Id, but there are several other possible causes as well, such as ;

Erratic camshaft position due to low oil pressure
Camshaft advance mechanism binding (VCT unit)
Faulty Crankshaft Position Sensor (POS)
Fuel filler cap remains open or fails to close

P000E is a kind of Powertrain Trouble Code

Powertrain of a modern automobile, comprising engine (with exhaust system), transmission, drive shaft, suspension and the wheels. In a motor vehicle, the term powertrain or powerplant describes the main components that generate power and deliver it to the road surface, water, or air.

Engine OBD 2 Codes website is a freeware resource center for engine trouble codes.

About Us | Contact | Privacy

P000E Mercedes-benz Vision OBD Code

P000E Mercedes-benz Vision Error Code Repair Process :

Common Causes of Mercedes-benz Vision P000E OBD2 Code

P000E code for other Mercedes-benz cars