P0931 Abarth 124 OBD Code

OBD/2 P0931 error code description and symptoms.

Low Speed Fuel Pump Primary Circuit Malfunction The PCM monitors the low speed fuel pump (LFP) primary circuit output from the PCM.
The test fails if: When the LFP circuit is commanded on (grounded), excessive current draw is detected on the LFP circuit; or when the LFP circuit is commanded off, voltage is not detected on the LFP circuit (the PCM expects to detect VPWR voltage coming through the low speed fuel pump relay coil to the LFP circuit). Open or shorted low fuel pump (LFP) circuit Open VPWR to low speed fuel pump relay Damaged low speed fuel pump relay Damaged PCM An open circuit or short to ground can only be detected with the low speed fuel pump.

At this point we are assuming that the fuses and relays are good. You will need to locate the PCM/TCM and the power input signal circuit using your vehicle information source. Unplug the connector from the PCM/TCM, place the ignition switch in the ON position, and probe the appropriate circuit with the positive test lead of the DVOM.

P0931 Abarth 124 Error Code Repair Process :

When you turn on the ignition, the Service Engine Soon or Check Engine P0931 light should flash briefly, indicating that the OBD system is ready to scan your vehicle for any malfunctions. After this brief flash, the light should stay off while you drive as long as no problems are detected. If p0931 gear shift lock solenoid control circuit high so, you'll be glad to know that your vehicle is equipped with an early warning system that could save you time, money, and fuel in addition to helping protect the p0931 gear shift lock solenoid control circuit high.

Common Causes of Abarth 124 P0931 OBD2 Code

A common cause of code P0931 is the failure of P0931 Gear Shift Lock Solenoid Control Circuit High, but there are several other possible causes as well, such as ;

EVAP canister or fuel tank leaks
Air fuel ratio (A/F) Sensor 1 Bank 1 circuit poor electrical connection
Faulty variable valve timing (VVT)
Three way catalyst converter Bank 1

P0931 is a kind of Powertrain Trouble Code

Powertrain of a modern automobile, comprising engine (with exhaust system), transmission, drive shaft, suspension and the wheels. In a motor vehicle, the term powertrain or powerplant describes the main components that generate power and deliver it to the road surface, water, or air.

Engine OBD 2 Codes website is a freeware resource center for engine trouble codes.

About Us | Contact | Privacy

P0931 Abarth 124 OBD Code

P0931 Abarth 124 Error Code Repair Process :

Common Causes of Abarth 124 P0931 OBD2 Code

P0931 code for other Abarth cars