P1221 Abarth Bialbero OBD Code

OBD/2 P1221 error code description and symptoms.

Output Shaft Speed sensor circuit intermittent failure The output shaft speed sensor signal to the PCM is irregular or interrupted.
Harness connector not properly seated Harness intermittently shorted, or open Harness connector damaged OSS sensor damaged, or not installed properly Verify harness and connector integrity Verify OSS sensor proper installation.

Circuit High Input codes like P1221 are mostly caused by defective alternators that develop excessive voltages, although there may be other causes as well, such as short circuits that 'leak' current into a particular system from other, unrelated systems that work on higher voltages. Note that in the case of short circuits that leak power into a control circuit, there is likely to be other, seemingly unrelated trouble codes present along with the code(s) being investigated. Diagnosing a 'high input' code will always involve a thorough testing of the charging system as a first step, followed by measures to isolate the system from all other possible sources of power during resistance, continuity, and reference voltage tests.

P1221 Abarth Bialbero Error Code Repair Process :

When you turn on the ignition, the Service Engine Soon or Check Engine P1221 light should flash briefly, indicating that the OBD system is ready to scan your vehicle for any malfunctions. After this brief flash, the light should stay off while you drive as long as no problems are detected. If p1221 traction control system malfunction so, you'll be glad to know that your vehicle is equipped with an early warning system that could save you time, money, and fuel in addition to helping protect the p1221 traction control system malfunction.

Difficulty Level (Easy)

Repair Time (45 Min.)

Cost Prediction : $ 75-90

Common Causes of Abarth Bialbero P1221 OBD2 Code

A common cause of code P1221 is the failure of P1221 Traction Control System Malfunction, but there are several other possible causes as well, such as ;

• Camshaft Position Sensor harness is open or shorted
• Faulty Air Flow Meter
• Incorrect Positive Crankcase Ventilation (PCV) hose connection
• Incorrect fuel pressure

P1221 is a kind of Powertrain Trouble Code Powertrain of a modern automobile, comprising engine (with exhaust system), transmission, drive shaft, suspension and the wheels. In a motor vehicle, the term powertrain or powerplant describes the main components that generate power and deliver it to the road surface, water, or air.

P1221 code for other Abarth cars

You can view according P1221 DTC for your car model. We selected several models to see obd2 solutions click and view it.

• P1221 Abarth 1000
• P1221 Abarth 103
• P1221 Abarth 124
• P1221 Abarth 124 Spider
• P1221 Abarth 1300
• P1221 Abarth 1500
• P1221 Abarth 1600
• P1221 Abarth 200
• P1221 Abarth 2000
• P1221 Abarth 207
• P1221 Abarth 210
• P1221 Abarth 2200
• P1221 Abarth 2400
• P1221 Abarth 500
• P1221 Abarth 595
• P1221 Abarth 600
• P1221 Abarth 700
• P1221 Abarth 750
• P1221 Abarth 800
• P1221 Abarth 850
• P1221 Abarth A112
• P1221 Abarth Coupe
• P1221 Abarth Grande Punto
• P1221 Abarth Lancia
• P1221 Abarth Mono
• P1221 Abarth Monomille
• P1221 Abarth Monotipo
• P1221 Abarth Ot
• P1221 Abarth Ot 1000
• P1221 Abarth Ot 1600
• P1221 Abarth Ot 2000
• P1221 Abarth Otr 1000
• P1221 Abarth Renault
• P1221 Abarth Renault Fregate
• P1221 Abarth Simca
• P1221 Abarth Spider
• P1221 Abarth Stola

Engine OBD 2 Codes website is a freeware resource center for engine trouble codes.

About Us | Contact | Privacy

Copyright 2017 © All rights reserved