P2192 Toyota Blizzard OBD Code

OBD/2 P2192 error code description and symptoms.

Intake Manifold Runner Control Malfunction (Stuck Open) The IMRC system is monitored for failure during continuous, key ON engine OFF or key ON engine running self-test. The test fails when the signal on the monitor pin is less than an expected calibrated range at closed throttle. IMRC monitor signal circuit shorted to PWR GND or SIG RTN Damaged IMRC actuator Damaged PCM An IMRCM PID reading approximately near 1 volt at closed throttle may indicate a fault.

To check for an open circuit, trace along the length of the transmission control circuit, checking for breaks in the wiring. Repair any broken wiring and make sure all connectors are fully seated and locked.Pay close attention to connectors, looking for corrosion, bent or broken pins, or moisture in the connector. Repair any connector issues even if they are not specifically part of the transmission control circuit as they may serve a function in providing power to the transmission control circuit.

P2192 Toyota Blizzard Error Code Repair Process :

The rule of P2192 code when it comes to emissions-related vehicle repair is that any modification that changes the vehicle from a certified configuration to a non-certified configuration is considered tampering: this applies to both vehicle owners and repair facilities and is, therefore, a Federal offense. Replacing a catalyst with a straight pipe is one traditional example of p2192 system too rich at higher load bank 1. Likewise, overriding the OBD P2192 error in system through the use of high-tech defeat devices or non-certified computer chips, for example, would also be considered tampering. The OBD system may, however, be repaired back to its original certified configuration with certified performance chips or appropriate aftermarket parts.

Common Causes of Toyota Blizzard P2192 OBD2 Code

A common cause of code P2192 is the failure of P2192 System Too Rich at Higher Load Bank 1, but there are several other possible causes as well, such as ;

1Camshaft Position Sensor circuit poor electrical connection
Exhaust tube
Camshaft Position Sensor harness is open or shorted
Spark plugs may be faulty

P2192 is a kind of Powertrain Trouble Code

Powertrain of a modern automobile, comprising engine (with exhaust system), transmission, drive shaft, suspension and the wheels. In a motor vehicle, the term powertrain or powerplant describes the main components that generate power and deliver it to the road surface, water, or air.

Engine OBD 2 Codes website is a freeware resource center for engine trouble codes.

About Us | Contact | Privacy

P2192 Toyota Blizzard OBD Code

P2192 Toyota Blizzard Error Code Repair Process :

Common Causes of Toyota Blizzard P2192 OBD2 Code

P2192 code for other Toyota cars