P2622 Mitsubishi Galant Viii OBD Code

OBD/2 P2622 error code description and symptoms.

The Transmission Range Sensor (also referred to as the PRNDL input an/or neutral safety switch) tells the transmission control module (TCM) an the engine control module (PCM) that the transmission is in park, reverse, neutral, drive, low, 2nd, 3rd etc. It is attached directly to the manual valve of transmission, so when the shift lever is moved from park to drive, the Transmission Range Sensor communicates this critical information to the above mentioned vehicle control module systems.

On some transmissions, such as automated manual transmissions or automatic transmissions with manual mode, the GSP switch lets the TCM know whether or not the driver has selected automatic or manual function. On manual transmissions, the GSP switch informs the TCM which gear the driver is selecting, and may function as a neutral safety switch, depending on system design. The TCM also uses the gate select position switch to monitor transmission operation. For example, if the driver selects manual mode and selects 3rd gear on an automatic transmission, the TCM may monitor speed sensors to detect clutch and brake slippage.

P2622 Mitsubishi Galant Viii Error Code Repair Process :

When you turn on the ignition, the Service Engine Soon or Check Engine P2622 light should flash briefly, indicating that the OBD system is ready to scan your vehicle for any malfunctions. After this brief flash, the light should stay off while you drive as long as no problems are detected. If p2622 throttle position output circuit high so, you'll be glad to know that your vehicle is equipped with an early warning system that could save you time, money, and fuel in addition to helping protect the p2622 throttle position output circuit high.

Common Causes of Mitsubishi Galant Viii P2622 OBD2 Code

A common cause of code P2622 is the failure of P2622 Throttle Position Output Circuit High, but there are several other possible causes as well, such as ;

Air fuel ratio (A/F) Sensor 1 Bank 1 harness is open or shorted
Engine Control Module (ECM)
Damaged VCT phaser
Camshaft Position Sensor harness is open or shorted

P2622 is a kind of Powertrain Trouble Code

Powertrain of a modern automobile, comprising engine (with exhaust system), transmission, drive shaft, suspension and the wheels. In a motor vehicle, the term powertrain or powerplant describes the main components that generate power and deliver it to the road surface, water, or air.

Engine OBD 2 Codes website is a freeware resource center for engine trouble codes.

About Us | Contact | Privacy

P2622 Mitsubishi Galant Viii OBD Code

P2622 Mitsubishi Galant Viii Error Code Repair Process :

Common Causes of Mitsubishi Galant Viii P2622 OBD2 Code

P2622 code for other Mitsubishi cars