P3613 Unipower 998 OBD Code

OBD/2 P3613 error code description and symptoms.

Output Shaft Speed sensor circuit intermittent failure The output shaft speed sensor signal to the PCM is irregular or interrupted.
Harness connector not properly seated Harness intermittently shorted, or open Harness connector damaged OSS sensor damaged, or not installed properly Verify harness and connector integrity Verify OSS sensor proper installation.

On some transmissions, such as automated manual transmissions or automatic transmissions with manual mode, the GSP switch lets the TCM know whether or not the driver has selected automatic or manual function. On manual transmissions, the GSP switch informs the TCM which gear the driver is selecting, and may function as a neutral safety switch, depending on system design. The TCM also uses the gate select position switch to monitor transmission operation. For example, if the driver selects manual mode and selects 3rd gear on an automatic transmission, the TCM may monitor speed sensors to detect clutch and brake slippage.

P3613 Unipower 998 Error Code Repair Process :

If your motor # 1 input circuit short to gnd check engine light is illuminated, it's best to take it in for diagnostic testing, which can feel like a hassle. Because while the lights vary in appearance from vehicle to vehicle, all have the same basic meaning: There's a problem with the car's emissions system. The on-board diagnostics system P3613 and engine control unit are in charge of monitoring a bunch of different motor # 1 input circuit short to gnd, and if they get a reading that's a little out of whack, up pops the check engine light.

Difficulty Level (Expert)

Repair Time (60 Min.)

Cost Prediction : $ 80-120

Common Causes of Unipower 998 P3613 OBD2 Code

A common cause of code P3613 is the failure of Motor # 1 Input Circuit Short to Gnd, but there are several other possible causes as well, such as ;

• Camshaft Position Sensor harness is open or shorted
• Faulty Camshaft Position Sensor
• Insufficient cylinders compression
• Open circuits caused by damage to wiring.

P3613 is a kind of Powertrain Trouble Code Powertrain of a modern automobile, comprising engine (with exhaust system), transmission, drive shaft, suspension and the wheels. In a motor vehicle, the term powertrain or powerplant describes the main components that generate power and deliver it to the road surface, water, or air.

P3613 code for other Unipower cars

You can view according P3613 DTC for your car model. We selected several models to see obd2 solutions click and view it.

• P3613 Unipower 1275

Engine OBD 2 Codes website is a freeware resource center for engine trouble codes.

About Us | Contact | Privacy

Copyright 2017 © All rights reserved