U0453 Alpine A310 OBD Code

OBD/2 U0453 error code description and symptoms.

Variable Cam Timing Over-advanced (Bank 1) The comprehensive component monitor (CCM) monitors the VCT position for an over-advanced camshaft timing.
The test fails when the camshaft timing exceeds a maximum calibrated value or remains in an advanced position. Cam timing improperly set No oil flow to the VCT piston chamber Low oil pressure VCT solenoid valve stuck closed Camshaft advance mechanism binding (VCT unit) U0453 DTC is a check of the VCT unit.

To check for an open circuit, trace along the length of the transmission control circuit, checking for breaks in the wiring. Repair any broken wiring and make sure all connectors are fully seated and locked.Pay close attention to connectors, looking for corrosion, bent or broken pins, or moisture in the connector. Repair any connector issues even if they are not specifically part of the transmission control circuit as they may serve a function in providing power to the transmission control circuit.

U0453 Alpine A310 Error Code Repair Process :

When you turn on the ignition, the Service Engine Soon or Check Engine U0453 light should flash briefly, indicating that the OBD system is ready to scan your vehicle for any malfunctions. After this brief flash, the light should stay off while you drive as long as no problems are detected. If catalyst temperature sensor low input (bank 1) so, you'll be glad to know that your vehicle is equipped with an early warning system that could save you time, money, and fuel in addition to helping protect the catalyst temperature sensor low input (bank 1).

Difficulty Level (Soso)

Repair Time (50 Min.)

Cost Prediction : $ 30-110

Common Causes of Alpine A310 U0453 OBD2 Code

A common cause of code U0453 is the failure of Catalyst Temperature Sensor Low Input (Bank 1), but there are several other possible causes as well, such as ;

• Camshaft advance mechanism binding (VCT unit)
• Faulty Air fuel ratio (A/F) Sensor 1 Bank 1
• Fuel tank leaking
• Three way catalyst converter Bank 1

U0453 is a kind of Network Trouble Code U-code indicates that engine communication errors and shows lost communication with engine parts.U-Codes are fairly straight forward, given all of the articles and technical publications that have been written regarding these problematic codes. In most cases, it just comes down to identifying the module that isn't communicating with the other modules on the CAN bus line for whatever reason.

U0453 code for other Alpine cars

You can view according U0453 DTC for your car model. We selected several models to see obd2 solutions click and view it.

• U0453 Alpine A106
• U0453 Alpine A108
• U0453 Alpine A108-904
• U0453 Alpine A110
• U0453 Alpine A442
• U0453 Alpine A610
• U0453 Alpine Berlinette
• U0453 Alpine Cabriolet
• U0453 Alpine Coupe
• U0453 Alpine V6

Engine OBD 2 Codes website is a freeware resource center for engine trouble codes.

About Us | Contact | Privacy

Copyright 2017 © All rights reserved