U2241 Lagonda Lg OBD Code

OBD/2 U2241 error code description and symptoms.

Intake Manifold Runner Control Malfunction (Stuck Open) The IMRC system is monitored for failure during continuous, key ON engine OFF or key ON engine running self-test. The test fails when the signal on the monitor pin is less than an expected calibrated range at closed throttle. IMRC monitor signal circuit shorted to PWR GND or SIG RTN Damaged IMRC actuator Damaged PCM An IMRCM PID reading approximately near 1 volt at closed throttle may indicate a fault.

Regardless of the design though, the purpose of all clutch actuating systems is to improve the driving experience by removing the need for manual clutch operation by the driver. Computer-controlled clutch actuating systems work particularly well in dual clutch systems where one clutch controls gear changes of even-numbered gear ratios, and a second clutch that controls gear changes of odd-numbered ratios.

U2241 Lagonda Lg Error Code Repair Process :

If your abs function enabled input circuit failure check engine light is illuminated, it's best to take it in for diagnostic testing, which can feel like a hassle. Because while the lights vary in appearance from vehicle to vehicle, all have the same basic meaning: There's a problem with the car's emissions system. The on-board diagnostics system U2241 and engine control unit are in charge of monitoring a bunch of different abs function enabled input circuit failure, and if they get a reading that's a little out of whack, up pops the check engine light.

Difficulty Level (Easy)

Repair Time (45 Min.)

Cost Prediction : $ 80-120

Common Causes of Lagonda Lg U2241 OBD2 Code

A common cause of code U2241 is the failure of ABS Function Enabled Input Circuit Failure, but there are several other possible causes as well, such as ;

• 1Camshaft Position Sensor circuit poor electrical connection
• Air fuel ratio (A/F) Sensor 1 Bank 1 circuit poor electrical connection
• Ignition misfiring
• Starting system circuit Dead (Weak) battery

U2241 is a kind of Network Trouble Code U-code indicates that engine communication errors and shows lost communication with engine parts.U-Codes are fairly straight forward, given all of the articles and technical publications that have been written regarding these problematic codes. In most cases, it just comes down to identifying the module that isn't communicating with the other modules on the CAN bus line for whatever reason.

U2241 code for other Lagonda cars

You can view according U2241 DTC for your car model. We selected several models to see obd2 solutions click and view it.

• U2241 Lagonda 11.1
• U2241 Lagonda 11.9
• U2241 Lagonda 12
• U2241 Lagonda 16
• U2241 Lagonda 2.5-litre
• U2241 Lagonda 2-litre
• U2241 Lagonda 3.5-litre
• U2241 Lagonda 3-litre
• U2241 Lagonda 42 Hp
• U2241 Lagonda M
• U2241 Lagonda Rapide
• U2241 Lagonda Rapier
• U2241 Lagonda Special Six
• U2241 Lagonda V
• U2241 Lagonda Vignale

Engine OBD 2 Codes website is a freeware resource center for engine trouble codes.

About Us | Contact | Privacy

Copyright 2017 © All rights reserved