U2690 Aston Martin Db6 OBD Code

OBD/2 U2690 error code description and symptoms.

The Throttle Position sensor signals the Engine Control Module as to the current position of the engine throttle valve.
The current throttle valve opening is based on the driver's input from the gas pedal. The ECM uses the information from this sensor to help calculate fuel delivery and spark timing.

A good starting point in your diagnosis is checking all system fuses and fusible links. This can be done using the DVOM on the voltage setting. You will want to test the fuses with circuits loaded. Some fuses will appear normal until a load is placed on their respective circuit; at which point they will fail. This has been the cause of many 'phantom malfunctions'. Consult your vehicle information source for fuse and fusible link locations. If all fuses are in working order, you may want to check TCM relay operation by swapping identical relays. Usually the horn relay, starter relay, fuel pump relay, air conditioning clutch relay, and controller relays are similar enough in design to swap for diagnostic purposes.

U2690 Aston Martin Db6 Error Code Repair Process :

If your scp (j1850) invalid or missing data for primary id check engine light is illuminated, it's best to take it in for diagnostic testing, which can feel like a hassle. Because while the lights vary in appearance from vehicle to vehicle, all have the same basic meaning: There's a problem with the car's emissions system. The on-board diagnostics system U2690 and engine control unit are in charge of monitoring a bunch of different scp (j1850) invalid or missing data for primary id, and if they get a reading that's a little out of whack, up pops the check engine light.

Difficulty Level (Expert)

Repair Time (60 Min.)

Cost Prediction : $ 80-120

Common Causes of Aston Martin Db6 U2690 OBD2 Code

A common cause of code U2690 is the failure of SCP (J1850) Invalid or Missing Data for Primary Id, but there are several other possible causes as well, such as ;

• Damaged ECM
• Faulty Variable Camshaft Timing (VCT) position solenoid
• Fuel pressure
• Open VPWR circuit

U2690 is a kind of Network Trouble Code U-code indicates that engine communication errors and shows lost communication with engine parts.U-Codes are fairly straight forward, given all of the articles and technical publications that have been written regarding these problematic codes. In most cases, it just comes down to identifying the module that isn't communicating with the other modules on the CAN bus line for whatever reason.

U2690 code for other Aston cars

You can view according U2690 DTC for your car model. We selected several models to see obd2 solutions click and view it.

• U2690 Aston Martin 15
• U2690 Aston Martin 2-litre
• U2690 Aston Martin 2-litres
• U2690 Aston Martin Am Vantage
• U2690 Aston Martin Atom
• U2690 Aston Martin Bulldog
• U2690 Aston Martin Db1
• U2690 Aston Martin Db2
• U2690 Aston Martin Db3
• U2690 Aston Martin Db4
• U2690 Aston Martin Db5
• U2690 Aston Martin Db7
• U2690 Aston Martin Db7 Vantage
• U2690 Aston Martin Db9
• U2690 Aston Martin Dbr2
• U2690 Aston Martin Dbs
• U2690 Aston Martin Lagonda
• U2690 Aston Martin Le Mans
• U2690 Aston Martin Mark Ii
• U2690 Aston Martin Rapide
• U2690 Aston Martin Sports
• U2690 Aston Martin Ulster
• U2690 Aston Martin V12
• U2690 Aston Martin V12 Vanquish
• U2690 Aston Martin V8
• U2690 Aston Martin Vanquish
• U2690 Aston Martin Vantage
• U2690 Aston Martin Virage

Engine OBD 2 Codes website is a freeware resource center for engine trouble codes.

About Us | Contact | Privacy

Copyright 2017 © All rights reserved