C242C Peugeot 208 OBD Code

OBD/2 C242C error code description and symptoms.

The Transmission Range Sensor (also referred to as the PRNDL input an/or neutral safety switch) tells the transmission control module (TCM) an the engine control module (PCM) that the transmission is in park, reverse, neutral, drive, low, 2nd, 3rd etc. It is attached directly to the manual valve of transmission, so when the shift lever is moved from park to drive, the Transmission Range Sensor communicates this critical information to the above mentioned vehicle control module systems.

Circuit High Input codes like C242C are mostly caused by defective alternators that develop excessive voltages, although there may be other causes as well, such as short circuits that 'leak' current into a particular system from other, unrelated systems that work on higher voltages. Note that in the case of short circuits that leak power into a control circuit, there is likely to be other, seemingly unrelated trouble codes present along with the code(s) being investigated. Diagnosing a 'high input' code will always involve a thorough testing of the charging system as a first step, followed by measures to isolate the system from all other possible sources of power during resistance, continuity, and reference voltage tests.

C242C Peugeot 208 Error Code Repair Process :

If your pcm - idm communications error check engine light is illuminated, it's best to take it in for diagnostic testing, which can feel like a hassle. Because while the lights vary in appearance from vehicle to vehicle, all have the same basic meaning: There's a problem with the car's emissions system. The on-board diagnostics system C242C and engine control unit are in charge of monitoring a bunch of different pcm - idm communications error, and if they get a reading that's a little out of whack, up pops the check engine light.

Common Causes of Peugeot 208 C242C OBD2 Code

A common cause of code C242C is the failure of PCM - IDM Communications Error, but there are several other possible causes as well, such as ;

Air fuel ratio (A/F) Sensor 1 Bank 1 harness is open or shorted
Erratic camshaft position due to low oil pressure
Intake Valve Timing Control Solenoid Valve circuit poor electrical connection
Faulty spark plug (s)

C242C is a kind of Chassis Trouble Code

Diagnosing chassis noises can be one of the most frustrating problems technicians face. Fortunately, manufacturers have engineered noise, vibration and harshness (NVH) diagnostic techniques and equipment to find the source of the noise.

Engine OBD 2 Codes website is a freeware resource center for engine trouble codes.

About Us | Contact | Privacy

C242C Peugeot 208 OBD Code

C242C Peugeot 208 Error Code Repair Process :

Common Causes of Peugeot 208 C242C OBD2 Code

C242C code for other Peugeot cars