C242C Peugeot 307 OBD Code

OBD/2 C242C error code description and symptoms.

Engine Coolant Temperature (ECT) Circuit High Input Indicates the sensor signal is greater than Self-Test maximum. The ECT sensor maximum is 4.6 volts or -50 C (-58 F). Note on some vehicles that are not equipped with an ECT sensor, CHT can be used and can set this DTC. Open circuit in harness Sensor signal short to power Damaged PCM Improper harness connection Damaged sensor ECT V PID reading greater than 4.6 volts with key ON and engine OFF or during any engine operating mode indicates a hard fault.

On some transmissions, such as automated manual transmissions or automatic transmissions with manual mode, the GSP switch lets the TCM know whether or not the driver has selected automatic or manual function. On manual transmissions, the GSP switch informs the TCM which gear the driver is selecting, and may function as a neutral safety switch, depending on system design. The TCM also uses the gate select position switch to monitor transmission operation. For example, if the driver selects manual mode and selects 3rd gear on an automatic transmission, the TCM may monitor speed sensors to detect clutch and brake slippage.

C242C Peugeot 307 Error Code Repair Process :

When you turn on the ignition, the Service Engine Soon or Check Engine C242C light should flash briefly, indicating that the OBD system is ready to scan your vehicle for any malfunctions. After this brief flash, the light should stay off while you drive as long as no problems are detected. If pcm - idm communications error so, you'll be glad to know that your vehicle is equipped with an early warning system that could save you time, money, and fuel in addition to helping protect the pcm - idm communications error.

Common Causes of Peugeot 307 C242C OBD2 Code

A common cause of code C242C is the failure of PCM - IDM Communications Error, but there are several other possible causes as well, such as ;

Engine Control Module (ECM)
Faulty spark plug (s)
Faulty Variable Camshaft Timing (VCT) position solenoid
Intake Valve Timing Control Solenoid Valve harness is open or shorted

C242C is a kind of Chassis Trouble Code

Diagnosing chassis noises can be one of the most frustrating problems technicians face. Fortunately, manufacturers have engineered noise, vibration and harshness (NVH) diagnostic techniques and equipment to find the source of the noise.

Engine OBD 2 Codes website is a freeware resource center for engine trouble codes.

About Us | Contact | Privacy

C242C Peugeot 307 OBD Code

C242C Peugeot 307 Error Code Repair Process :

Common Causes of Peugeot 307 C242C OBD2 Code

C242C code for other Peugeot cars